Advantages of Sharon_Brush:

1. It is possible to clean both carpet and hard floor with a single machine. The commutation from carpet to hard floor cleaning and vice versa is done easily, simply turning the lever on the vacuum head.
2. Reduced width (only 29 cm) for professional cleaning even of small surfaces of carpet and hard floor.
3. Powerful and reliable brush motor which allows a deeper and faster cleaning.
4. Possibility to push the machine forward on hard floor without lifting the vacuum head thanks to proper support wheels.
5. The machine is light and easy to carry.
6. Vacuum head in die-cast aluminium,  practically indestructible.
7. Special profile of the vacuum head, which allows a shorter drying time.
8. Plastic and rubber handles, which avoid the cooling of the worker’s hands.
9. The height of the handle is adjustable so that it can be regulated according to the stature of the worker.
10. Water spraying can be operated simply turning the handle of the machine.
11. Tubes in stainless steel, strong and rustproof for the whole machine life.
12. Quick disconnect spray nozzles, which can be replaced by hand: the nozzles can be cleaned easily and without using any tool.
13. Automatic adjustment system of the rotating brush pressure according to the kind of carpet.
14. Brush easily replaceable with no need of turning the machine over.
15. The hand tool NS10PN-M, supplied as standard, allows to clean hard-to-reach corners.

Other technical advantages of Sharon-Brush:

1. High density polyethylene tanks, very strong and made for lasting a long time.
2. Transparent unbreakable cover, which allows to see the dirt while vacuuming.
3. Recovery tank easily detachable from the machine body, in order to make the tank emptying and cleaning easier.
4. The filters of the vacuum motor are easy to reach and removable for an easy cleaning.
5. The gasket are not glued and replaceable by hand. Easy to clean and change.
6. Strong wheels, in antimark rubber.
7. Brass quick-disconnect couplings, reliable and strong.
8. Water pump with bypass, which allows the automatic regulation of the optimal water lift according to the tool used. Moreover, the bypass device makes the pump more reliable and avoids problems in the years.
9. Pump built on Santoemma specifications, for lasting long.
10. Vacuum motor with thermal protection against overload.
11. Vacuum motor treated against rust.
12. Both motor and pump can work continuously.
13. Brush motor with thermal protection against overload.
14. Stainless steel brush bearings for a longer life.
15. Modular design that makes the maintenance easier. The maintenance of the machine can be done really at low costs. .

Recovery tank capacity:

12 liters

Solution tank capacity:

12 liters

Vacuum motor:
Power:
Maximum waterlift:
Maximum air-flow:

2 stages
1000 W
2200 mm H2O
50 l/sec.

Pump with by-pass: 
Power: 
Maximum pressure:
Maximum water-flow:

vibrating 
70 W
4 bar
 1,5 l/min

Cleaning width (carpet/hard floor):

270/290 mm

Number of nozzles:

3

Brush:

90 W
600 rot/min
232 mm

Max. performance:

120 sq. meter/h

Cable length:

10 m

Hose length:

2,5 m

Weight (machine body):

21 kg

Weight ( packaged machine):

25 kg

Dimensions:

28 x 78 x 90 cm

Package dimensions:

36 x 60 x 76 cm

Standard colors:

Blue

Tank construction:

High density polyethylene